Lovely little heater and fireplace. Ideal for boats up to up to 32 feet in length. The combustion process is completely isolated from the inside of the boat by the unique, direct vent design. Includes everything; ready to install!
Ideal for boats up to 30 to 36 feet. The combustion process is completely isolated from the inside of the boat by the unique, direct vent design. Includes Everything Ready to Install!
This Newport diesel heater is ideal for boats 30-35 ft. Small, compact, and bulkhead mounted. An attractive, economical diesel burning heater, providing comfortable, dry heat.
The Newport Solid Fuel Heater is a small stainless steel solid fuel heater designed for casual use ideal for boats 20-25ft. This heater burns one to two 1” thick wood or presto log, a handful of charcoal briquettes or coal.
Formerly the Sig Cozy Cabin Heater this is a small but powerful 5,500 BTU bulkhead mounted propane cabin heater. It provides lots of vented heat for your cabin with a cheery fireplace-like heating element.
Short version used as first piece of pipe from the top of diesel or solid fuel heater. The barometric damper helps decrease the draft on longer chimneys allowing the user to operate the unit on lower fuel settings. Recommended on all installs.
Used as the first piece of pipe from the top of diesel or solid fuel heater or stove. The barometric damper helps decrease the draft on longer chimneys allowing the user to operate the unit on lower fuel settings. Recommended on all installs.
Used to expel exhaust gases from 3 inch Dickinson diesel heaters and stoves.
Protection from heat radiating from a 3 inch diameter chimney flue stack.
Through deck chimney exit for 3 inch Dickinson diesel heater and stove exhausts.
Three inch diameter exhaust cap for use with diesel or solid fuel heaters on sailboats. Smooth curves to prevent lines from catching.
Best choice for heavy weather and preventing backdraft. The better the chimneys draft pressure; the more the heater will be to resist strong winds and the hotter you can get the heater without sooting.
Used with 3 inch Dickinson diesel heater and stove exhausts.
The Cap Guard protects the flue cap of propane heaters (July 2014 and newer) from being stepped on or snagged with a rope.
The exhaust Cap Guard protects the flue cap of a P9000 and P12000 (pre-2014) propane heater from being stepped on or snagged.
Used to extend the propane heater fireplace chimney. Made of 304 stainless steel. Allows extension of the 28 inch flue stack that comes with propane furnace to the maximum allowed chimney length of 56”.
Protection from heat radiating from a P9000 or P12000 Propane heaters flue stack.
Short 10 inch extension that connects to the supplied 28 inch long P9000 or P12000 Flue Stack.
Proudly Serving Boaters for 25 years
The Binnacle Canadian Mailing Address: 15 Purcells Cove Rd. Halifax, NS, B3N 1R2