Bilge Pumps - Electric

Rule RM500B Rule-Mate Automatic 500 GPH Bilge Pump

The new eco-friendly Rule Mate pump is a fully automated bilge pump featuring solid state water sensing technology to eliminate a separate float switch.

Rule RM1100B Rule-Mate Automatic 1100 GPH Bilge Pump

Solid state water sensing technology eliminates the need for a separate float switch. Turns on when water level reaches approximately 2-1/2" and shuts off at 5/8".

Rule 25SA Fully Automatic Bilge Pump 500 GPH

Automatic pumping without external floats or switches to tangle, stick or fail; Heavy duty construction; Completely submersible.

Whale Supersub Smart 650 Bilge Pump SS5212

Narrow design ideal for tight spaces, automatically senses bilge water level and switches on and off.

Rule RM800B Rule-Mate Automatic 800 GPH Bilge Pump

Features a pump and a non-contact, mercury free float switch in a single, compact housing. When the float rises, the pump begins to turn on.

Rule 10 Bilge Pump 2000 GPH 12V

No burn-out when running dry; Stainless Steel Shaft.; Engineered to commercial standards. Pumps 2000 GPH.

Rule 02 Bilge Pump 1500 GPH

Choose from 12V DC or 24V DC. A totally submersible, silent running, vibration-free, ignition-protected performer.

Jabsco Water Puppy Bronze Bilge Pump 18660-0121

Use for bilge pumping, livewell circulation, washdown, and general pumping requirements. Small bilge debris presents no problem to this bronze-bodied, flexible impeller pump.

Attwood Sahara S500 MK2 Automatic Bilge Pump 12V

Sahara Mk2 is the only automatic bilge pump that eliminates air-locks

Rule RM1500A Rule-Mate 1500 GPH Bilge Pump

Features a pump and a non-contact, mercury free float switch in a single, compact housing. When the float rises, the pump begins to turn on.

Rule LP900S LoPro Automatic Bilge Pump 900 GPH

Fully automatic, low profile pump designed for tight spaces, only 2 1/4" tall and 9 1/4" long. Discharge body swivels up to 180 degrees for ease of installation.

Attwood Sahara S1200 MK2 Automatic Bilge Pump 12V

The easiest, most reliable bilge pump. Fully automatic operation with permanent-magnet motor, a cool-running design and quality components, stainless steel shaft and steel reinforced.

Rule 25DA 500 GPH Bilge Pump

Exclusive Rule Moisture Tight Seals; Compact, Efficient, Maintenance Free; Positive Snap Lock Strainer Base; Totally Submersible

Whale SS1212 Supersub Smart 1100 Low Profile Automatic Bilge Pump

Low profile automatic bilge pump that senses bilge water level and switches on and off automatically. Fits deep down in confined bilge areas, under engines or cockpit floors

Rule 24DA Bilge Pump 360 GPH

Rule 14A 3700 GPH Bilge Pump 12V

This non-automatic 12V Rule 14A model is UL listed with 6' wire leads.

Rule 27DA Bilge Pump 1100 GPH 12V

Exclusive Rule moisture tight seals. Compact, efficient, maintenance-free. Positive snap-lock strainer base.

Attwood Sahara S800 MK2 Automatic Bilge Pump 12V

Engineered for extended service life, these pumps feature a cool-running design and quality components, including permanent magnet motors, stainless steel shafts, and steel-reinforced seals.

Rule RM2000A Rule-Mate 2000 GPH Bilge Pump

When water enters the bilge and reaches 2" (50 mm) in height, solid-state water sensing technology turns the pump on.

Rule 27SA Fully Automatic Bilge Pump 1100 GPH

Now includes "back flow preventer" and comes with 2 hose barb connections 1" and 1-1/8"

Rule 98B Shower Drain 800 GPH with Multi-Port Inlet 12V

Automatic pumping without external floats or switches to tangle, stick or fail. Heavy-duty construction and completely submersible.

Rule 16A 3700 GPH Bilge Pump 24V

For use with 24V DC systems. Heavy-duty construction for commercial and pleasure use; known for trouble-free operation and reliability. 1-1/2" (38 mm) discharge outlet.

Rule DB412 Dry Bilge Pump 4.0 GPM 12 Volt

Pumps down to 1/8" (3 mm) so you can have a dry bilge, and a dry bilge is a clean, odourless bilge. This new Rule bilge pump gets the last of the water out.

Rule 20DA 800GPH Bilge Pump 12V

Has a high flow-optimized impeller to provide greater flow at the same amperage as previous generations. Built-in Thermal Cut-Off provides added protection for the pump and vessel. A built-in check valve reduces the amount of water left over in the bilge, reducing odor and helps keep your bilge cleaner.

Attwood Tsunami T-1200 GPH Cartridge Bilge Pump

Tsunami Cartridge pumps have replaceable / interchangeable motor cores.

Attwood WaterBuster Portable Pump

Convenient and safe because it needs no electrical cord and runs up to 5 hours on three alkaline D batteries.

Rule 56D Bilge Pump 4000 GPH 12V DC

Large 2" discharge outlet with an open flow rate of 4,000 GPH.

Rule 20A Bilge Pump 1000 GPH

Attwood Shower Sump Pump System 500 GPH

The lid snaps in to allow quick installation (and removal for cleaning) and includes a gasket to seal the sump box against overflow.

Rule 98B-24 Shower Drain 800 GPH 3-Port 24V

24V Shower drain with automatic pumping without external floats or switches to tangle, stick or fail; Heavy duty construction; Completely submersible.

Rule 12 2000 GPH 24 Volt Bilge Pump

24 Volt model of the 2000 GPH Cartridge Series of bilge pumps offers traditional operation activated by a float or panel switch.

Rule LP900D LoPro Non-Automatic Bilge Pump 900 GPH

Only 58 mm high, the entire discharge body swivels up to 180 degrees for ease of installation, and the hose can also swivel 360 degrees for better routing. This non-automatic model requires a Float and, or a Panel switch.

Rule 53S Fully Automatic Bilge Pump 2000 GPH

Float switches are not required. The pump will turn on every 2-1/2 minutes for about one second to sense for water.

Attwood Shower Sump Pump System 750 GPH

This Large Box size model has overall outside dimensions of 7-23/64" x 13", and is 4-7/16" high.

Attwood Tsunami T-500 GPH Bilge Pump

Whale Gulper IC Bilge Pump Kit 12V SI8284

Whale IC 300 GPH Bilge Pump Kit includes a Gulper IC 320 Pump and IC Strainer with intelligent control built-in. Save time and money by reducing four separate components to one pre-wired system.