Rail Fittings for 1 Inch Diameter Tube

Sea Dog 293131 Four Way Corner Fitting for 1" Rail

For use with 1" O.D. Stainless steel Tubing

C.S. Johnson 29-501 Pulpit Anchor - 1" Rail

Can be used on the stern rail and bow pulpit to terminate lifeline Jaw fittings.

Grab Rail Post for 1" Rail

Elevates a 1" diameter grab rail approximately 1" above the deck.

Heavy Duty Top Cap 316 Stainless for 1" Tube

Features a raised and deeper set screw socket with more threads. For 1" tubing and has a 5/16" diameter eye.

Deck Hinge 316 Stainless Steel 90 Degree

Attaches to a flat surface like the cockpit coaming strip and serves as an attachment point for a bimini or dodger frame.

Stainless Boat Top Bimini Deck Hinge Angled

Boat top hinge with an approximate 10° angle. 3/16" bolt.

Grab Rail Center Fitting 60 Degree for 1" Rail

Stainless Steel rail fitting for 1" rail.

Rail Fitting 30 Degree Rectangular Base 1 in.

Rail Fitting 30 Degree Round Base 1 in.

Rail Fitting 45 Degree Rectangular Base 1 in.

Rail Fitting 45 Degree Round Base 1 in.

Rail Fitting 60 Degree Rectangular Base 1 in.

Rail Fitting 60 Degree Round Base 1 in.

Rail Fitting 90 Degree Round Base 1 in.

Rail Fitting 60 Degree Tee Universal 1 in.

Rail Fitting 90 Degree Rectangular Base 1 in.

Set Screw M6 x 6 Stainless A2

Metric 6 mm set screws for rail fittings. Fits most Victory rail fittings.

Rail Fitting 90 Degree Tee Universal 1 in.

Rail Fitting 90 Degree Elbow 1 in.

Rail Fitting Top Slide Hinged Jaw fits 1 in. Rail

Opens to wrap around existing tubing; then is screwed shut. A Jaw is then ready to accept a Top Cap.

Rail Fitting Top Slide Hinged Jaw 1-1/4 in. Rail

Opens to wrap around existing tubing; then is screwed shut. A Jaw is then ready to accept a Top Cap.

Sea Dog 327112 Rail Mount Fairlead with Stainless Insert

Allows easy routing of roller furling lines.

Rail Fitting Hinged Jaw Slide 1-1/2 in. Rail

Opens to wrap around existing 1-1/2 inch diameter tubing; then is screwed shut. The Jaw is then ready to accept a Top Cap.

Grab Rail End Fitting 60 Degree for 1" Rail

Finishes the end of a 1" diameter Grab Rail.

Rail Connector Stand-Off for 1 in Rail

Stainless steel stand-off rail connector for 1" diameter stainless tube.

Rail Fitting Stanchion Cap for 1 in. Rail

316 Stainless steel stanchion cap with a 5/16" pass-through hole. Secured with a 6mm diameter set screw.

Rail Fitting Top Cap Fork End 1 in. Tube

5/16" (8mm) space between the forks with a 3/8" (10mm) eye hole diameter.

Sea Dog Stanchion Eye 1 in.

Fits externally over 1" diameter tube.

Stanchion 24 in.Tall x 1 in. Stainless Steel

Tapered 1" OD by 24" high stanchion.

Universal Swivel Boat Top Bimini Deck Hinge

A pivoting hinge to compensate for the many different angles of decks and coamings. Fits tubing with an Eye fitting with an eye up to 3/16" thick.

Stanchion Base Cast Stainless Steel for 1in tubing

Cast stainless steel stanchion base with 1 inch inside diameter. Base is 3-3/4 x 2-3/4 inch.

Stanchion or Gate Brace for 1 Inch Stanchion

Used to brace the stanchion at lifeline gates.

Set Screw 8-32 x 1/4 In. Stainless

#8 Coarse thread (32 TPI) by 1/4" in length.

Set Screw 10-32 x 1/4 In. Stainless

#10 Fine thread (32 TPI) by 1/4" in length.

Rail Fitting End Plug with Eye for 1 in. Rail

Set Screw 1/4-20 x 3/16 In. Stainless

1/4" Coarse thread (20 TPI) by 3/16" in length.