General Purpose Pump Parts

Jabsco 18916-1050 Pressure Switch 50 PSI

Replacement pressure switch for 50 PSI variants of the Jabsco Par-Max 32605/32305 and 31295/31395 and 32600 Series pumps.

Jabsco 37072-0092 Waste Pump Assembly 12V Designer Series and Quiet Flush

For Jabsco Marine Designer Series and Quiet Flush Marine Toilets.

Jabsco 18916-1060 Pressure Switch 60 PSI

Replacement pressure switch for 60 PSI models of the Jabsco Par-Max Plus 82400, 82500 and 82600 Series pumps. Also for Jabsco Par-Max 4.0 GPM Washdown Pump

Flojet 02090-104 Pressure Switch 35 PSI

Standard Pressure Switch Kit

Inline Strainer 1/2 in. Hose Barb

Inline Strainer 3/4 in. Hose Barb

Inline Strainer with 3/4" Hose Barb prevents dirt and particles from entering pump intake, cuts repairs, and is easy to install.

Jabsco 37176-0000 Port Kit

1/2" Threaded inlet and outlet port that fit series 36900, 36800 and 36950 Series Jabsco water pumps.

Jabsco 40 PSI Pressure Switch 18916-1040

Replacement 40 PSI Pressure Switch for Par-Max Plus 82400, 82500 and 82600 Series 40 PSI Pumps. Also 40 PSI models of Par-Max 1.9 31295-0092, Par-Max 2.9 31395-0392, and Par-Max 3.5 Water Pressure Pumps. And Jabsco Dual Max 31670-0092 - Upper Pump (only).

Jabsco 90197-0000 Quiet Flush Toilet Minor Service Kit

For Jabsco Quiet Flush series of electric toilets.

Jabsco 653-0001-P Impeller Service Kit

Jabsco Impeller Kit 653-0001-P

Jabsco 1210-0001-P Impeller Service Kit

Jabsco 1210-0001 Engine cooling impeller kit. Profile K: 2-1/4 Inches in diameter with 12 blades. Used by most engine manufacturers.

Jabsco 4528-0001-P Impeller Service Kit

Neoprene replacement impeller for Jabsco 2760-0001, and 4530-0001 Flexible Impeller Pumps with 3/8 inch Shaft Diameter. Cross reference Volvo 803729, 875807-0, 876554-7, Yanmar 104211-42070, Johnson 09-806B, Sherwood 9979, Vetus IMP00501, Ancor J050010, CEF 500100, Onan 132-0859 and Perkins USA 24990272.

Jabsco 17937-0001-P Impeller Service Kit

Used in MAN, Ford Lehman and cross references to the following; Volvo 801277, 825941, 877061-2, Yanmar 127610-42200, Cat 7C-3286, Johnson 09-1028B, Sherwood 18200, Vetus IMP00301, Ancor J050009, CEF 500114, Oberdorfer 7441 and Perkins USA 0460024 and 24880031.

Jabsco 17936-0001 Impeller

Cross reference for the following; Volvo 875814-6, 875697, 845796, 844683, and 842857, Johnson 09-114B, Vetus IMP00801, Ancor J050045, CEF 500145, and Perkins USA 0460027.

Jabsco 18653-0001-P Impeller Service Kit

For most Jabsco Flexible Impeller Engine Cooling Pumps in the 29440, 29460, 29470, 29480 and 52020 Series. Replacement neoprene water transfer impeller for Kubota and the Johnson 09-810B.

Jabsco 18838-0001-P Impeller Service Kit

Jabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.

Jabsco 18948-0001-P Impeller Kit Service Kit

Replacement impeller for Jabsco 42730-0000 Flexible Impeller Engine Cooling Pump (Crusader, Pully Drive, 1" NPT Thread) and cross reference for the following Volvo 835874-9, Yamaha 6TA-12457-00, Sherwood 10615, Crusader 20300, Ancor J050020, CEF 500120, Obedorfer 8922, and Perkins USA NA900012 impellers.

Jabsco 22405-0001-P Impeller Service Kit

Neoprene replacement impeller for 15/32 inch Shaft Jabsco 29300, 29400, 51510 and 51520 Series of Engine Cooling Pump. Cross reference with Volvo 875583-7, Volvo 833995, Johnson 09-808B, Vetus IMP00601, Ancor J050021 and CEF 500121 impellers.

Jabsco Impeller Removal Tool 50070-0040

The easiest way to remove an impeller that is 1-9/16 to 2-9/16 inches in diameter, especially when the pump is mounted in tight and cramped conditions.

Jabsco Impeller Removal Tool Large 50070-0200

Easily removes large impellers from 65 to 118 mm in diameter, especially when the pump is mounted in tight and cramped conditions.

Jabsco 6303-0003-P Impeller Service Kit Nitrile

Replacement Impeller for Jabsco 37010-Series Electric Toilets, and the Jabsco 18590-2092 Macerator. Can also be used in most competitors Macerators. Also fits the 18660-0121 Water Puppy Bilge Pump.

Jabsco 6303-0001-P Impeller Service Kit Neoprene

Replacement neoprene impeller supplied with a Jabsco Water Puppy bilge pump.

Jabsco Water Entry Pressure Regulator 44411-1045

Protects your boats water system from unregulated city water hook-ups.

Jabsco PumpGard Strainer 3/4 In. Hose 90 Degree Plug-In 46400-0010

Makes it easier to install a pump by fitting Strainer directly into diaphragm pump inlet port. Swivel angled inlet port on rotating body allows inlet hose to approach from any direction.

Jabsco PumpGard Strainer 3/8 In. Hose Barb 46400-0003

The smallest inline PumpGard inline strainer with 3/8" Hose barb inlet, and 3/8" Hose barb outlet.

Jabsco PumpGard Strainer 1/2 in. Hose Barb 46400-0002

1/2" Hose barb inlet, and 1/2" Hose barb outlet.

Jabsco PumpGard Strainer 1/2 - 14 Male Straight Threaded 46400-0004

Water system PumpGard In-Line Strainer with 1/2"-14 Male IPS (Iron Pipe Size) Inlet and 1/2"-14 Male IPS Outlet.

Jabsco PumpGard Strainer 3/4 In. Hose Barb 46200-0000

3/4" (19 mm) Hose barb inlet with 3/4" (19 mm) Hose barb outlet.

Jabsco 37121-0010 Universal 40 PSI Pressure Switch Kit

Universal pressure switch for a number of Jabsco diaphragm water pressure pumps. Contains components for three possible versions of a 40-pound pressure switch depending on the pump its being installed in.

Non Return Valve 1" or 1-1/2"

The design allows using either a 1" or 1-1/2" diameter hose.

Whale FV1227 One Way Non Return Valve 1/2" Hose

One-way non-return check valve for 13 mm (1/2") flexible hose.

Whale LV1215 Non-Return Valve 1" and 1-1/2"

Non-Return Valves provide an easy way to maintain prime in a pumps suction or discharge line. Design allows the use of both 1" and 1-1/2" hose.

Whale LV1219 Non Return Valve 3/4" and 1"

Designed to fit in-line and provides an easy way to maintain prime in a suction or discharge line. Each end accepts a 3/4" (19 mm) or 1" (25 mm) inside diameter hose.

Whale SB4222 Side Entry Strainer with Non-Return Valve

Fitted at the end of the suction hose in the bilge, the Whale Strumbox prevents debris from entering and perhaps blocking the hose or bilge pump

Whale Top Entry Strainer with Non-Return Valve SB5865

Fitted at the end of suction hose deep in the bilge to allow the maximum amount of water to be pumped from the bilge.

Jabsco Macerator Housing Conversion Kit