This Item does not qualify for Free Shipping! More Info...
The combustion process is completely isolated from the inside of the boat by the unique, direct vent design. A built-in 12V DC blower provides good heat circulation.
The heater is sold with all accessories needed including a stainless steel backing plate, 28 Inches of flexible double stainless chimney and the deck fitting cap.
Propane supply that uses an 11" WC Low Pressure Regulator, and fittings are needed to complete the installation.
The P12000 unit will heat an approximate 1,100 cubic foot area (12' x 12' x 8'), based on an average climate it's installed in, altitude being sea level, and a well insulated area.
Includes Everything Ready to Install!
Lovely little heater and fireplace. Ideal for boats RVs, Trailers and cabins. The combustion process is completely isolated from the inside of the boat by the unique, direct vent design. Includes everything; ready to install!
This Newport diesel heater is ideal for boats 30-35 ft. Small, compact, and bulkhead mounted. An attractive, economical diesel burning heater, providing comfortable, dry heat.
The Newport Solid Fuel Heater is a small stainless steel solid fuel heater designed for casual use. It's ideal for boats 20-25'. This heater burns one to two 1" thick wood or presto log, a handful of charcoal briquettes or coal.
Hot water forced air heaters are designed to efficiently use the wastewater heat produced by a water-cooled engine, or a hot water system, to generate air heat.
Suitable for sailboats up to 26 feet (8 m). Kit includes: 3" x 3M ducting, loose duct fittings, copper fuel lines, fire resistant fuel adaptors, 10 ft. double wall exhaust, digi-controller with diagnostics.
Suitable for sailboats up to 36 feet. Kit includes 3 1/2" x 30 ft. ducting, 3" x 13 ft. ducting, loose duct fittings, 2 Y-Pieces, 2 Closeable, 1 Non-Closable vents, copper fuel lines, fire resistant fuel adaptors, 10 ft. double wall exhaust and Digi-Controller with diagnostics.
For boats up to 49 feet or 15 m in length. Includes 3 1/2" x 33 feet of ducting, 3" x 20 ft ducting, loose duct fittings, 3 Y-Pieces, 3 Closable and 1 non-closable outlet, copper fuel lines, fire-resistant fuel adaptors, 10 feet of double-wall exhaust and a Digi-Controller with diagnostics.
Designed for commercial use, this hydronic system is perfect for fishing boats, ferries, barges and tour boats. Heater Craft backs the product with a 4/48 limited warranty - 4 Years, 48 Months.
Raises the ambient temperature above the dew point to control mold and mildew. Draws less than 75 watts
Includes deck fitting, dress ring, weather gasket, and mounting hardware
The short version used as the first piece of pipe from the top of diesel or solid fuel heater. The barometric damper helps decrease the draft on longer chimneys allowing the user to operate the unit on lower fuel settings. Recommended on all installs.
Used as the first piece of pipe from the top of diesel or solid fuel heater or stove. The barometric damper helps decrease the draft on longer chimneys allowing the user to operate the unit on lower fuel settings. Recommended on all installs.
Used to expel exhaust gases from 3" Dickinson diesel heaters and stoves.
Protection from the heat radiating from a 3" diameter chimney flue stack.
Register your email address below to receive an email as soon as this becomes available again.
Your feedback has been forwarded to Binnacle.com. Your feedback will be reviewed and considered carefully.If your feedback requires a response, we expect to email you a reply within 24 hours (Monday to Friday).
Proudly Serving Boaters for 25 years
The Binnacle Canadian Mailing Address: 1065 Purcells Cove Rd. Halifax, NS, B3N 1R2