Vetus Flexible Waste Tank 55l (14.5USg)
A Vetus Odor-free Flexible Holding Tank provides an inexpensive and simple Type III solution to your waste water storage. The more rigorously enforced laws against overboard discharge now make non-compliance extremely costly.
The Vetus TANKV55 flexible tank is suitable to store grey and black waste water and is odour tight. It can be installed easily and quickly. It assumes the shape of the space in which it is placed and can be positioned in places that are normally difficult to reach. There is no need for any additional installation parts. Fitting the outlet nipple and connecting the hoses for inlet and outlet are the only things to be done. When filled, the height is approx. 30 cm.
Vetus not only welds the seams, but in addition they also weld an extra strip (see drawing below). This makes the Vetus flexible holding tank resistant against much higher pressures, especially if the contents are moving when a ship is rolling or pitching.
Dimensions: 31" x 27" empty and flat - 10"H when full.
Vetus come with the following fittings:
- 2 right angle nipples 38mm 1 1/2"
- Ventilation right angle nipple 16mm 5/8"
- Breather nipple 16mm 5/8"
- T-piece for non-siphoning device.
Vetus not only weld the seams, but in addition they also weld an extra strip. This makes the VETUS flexible tank resistant against much higher pressures, especially if the contents are moving when the boat is rolling or pitching.
Vetus Waste Tank Installation Instructions