Rail Fittings for 1 Inch Diameter Tube

Rail Fitting Top Cap Fork End 1 in. Tube

Binnacle.com #: 10688

5/16" (8mm) space between the forks with a 3/8" (10mm) eye hole diameter.

$16.70

Rail Fitting CH9791 Take Apart 90 Degree Tee 1 in

Binnacle.com #: 12117

Two pieces, take-a-part Tee for a 1" diameter rail.

$23.95

Set Screw M6 x 6 Stainless A2

Binnacle.com #: 13635

Metric 6 mm set screws for rail fittings. Fits most Victory rail fittings.

$0.40

Universal Swivel Boat Top Bimini Deck Hinge

Binnacle.com #: 16118

A pivoting hinge to compensate for the many different angles of decks and coamings. Fits tubing with an Eye fitting with an eye up to 3/16" thick.

$15.20

Stainless 90deg. End Fitting for 1" Tube

Binnacle.com #: 17337

$23.70

Rail Fitting Top Slide Hinged Jaw fits 1 in. Rail

Binnacle.com #: 22368

Opens to wrap around existing tubing; then is screwed shut. A Jaw is then ready to accept a Top Cap.

$15.95

Grab Rail Center Fitting 60 Degree for 1" Rail

Binnacle.com #: 22380

Stainless Steel rail fitting for 1" rail.

$14.20

Stanchion Base Cast Stainless Steel for 1in tubing

Binnacle.com #: 22994

Cast stainless steel stanchion base with 1 inch inside diameter. Base is 3-3/4 x 2-3/4 inch.

$31.20

Heavy Duty Top Cap 316 Stainless for 1" Tube

Binnacle.com #: 23186

Features a raised and deeper set screw socket with more threads. For 1" tubing and has a 5/16" diameter eye.

$15.95

Rail Fitting 90 Degree Round Base 1 in.

Binnacle.com #: 23468

$15.95

Rail Fitting 60 Degree Round Base 1 in.

Binnacle.com #: 23469

$15.95

Rail Fitting 45 Degree Round Base 1 in.

Binnacle.com #: 23470

$15.95

Rail Fitting 30 Degree Round Base 1 in.

Binnacle.com #: 23471

$15.95

Rail Fitting 90 Degree Rectangular Base 1 in.

Binnacle.com #: 23472

$15.95

Rail Fitting 60 Degree Rectangular Base 1 in.

Binnacle.com #: 23473

$15.95

Rail Fitting 45 Degree Rectangular Base 1 in.

Binnacle.com #: 23474

$15.95

Rail Fitting 30 Degree Rectangular Base 1 in.

Binnacle.com #: 23475

$15.95

Rail Fitting Top Slide with Bolt for 1 in Rail

Binnacle.com #: 23476

$14.20

Sea Dog 270531 Stanchion Sleeve with Eye for 1 in. Rail

Binnacle.com #: 23477

3/8" Eye diameter.

$15.95

Rail Fitting End Plug with Eye for 1 in. Rail

Binnacle.com #: 23479

$14.20

Rail Fitting Top Cap for 1 in. Rail

Binnacle.com #: 23480

$13.45

Rail Fitting 60 Degree Tee Universal 1 in.

Binnacle.com #: 23482

$15.20

Rail Fitting Three Way Corner Elbow for 1 in. Tubing

Binnacle.com #: 23499

$21.45

Deck Hinge 316 Stainless Steel 90 Degree

Binnacle.com #: 23503

Attaches to a flat surface like the cockpit coaming strip and serves as an attachment point for a bimini or dodger frame.

$10.20

Stainless Boat Top Bimini Deck Hinge Angled

Binnacle.com #: 23504

Boat top hinge with an approximate 10° angle. 3/16" bolt.

$11.95

Rail Fitting 90 Degree Tee Universal 1 in.

Binnacle.com #: 23543

$15.95

Grab Rail End Fitting 60 Degree for 1" Rail

Binnacle.com #: 23888

Finishes the end of a 1" diameter Grab Rail.

$14.20

Sea Dog Stanchion Eye 1 in.

Binnacle.com #: 24396

Fits externally over 1" diameter tube.

$17.45

Stanchion 24 in.Tall x 1 in. Stainless Steel

Binnacle.com #: 31308

Tapered 1" OD by 24" high stanchion.

$39.45

Sea Dog 270500 Stanchion Eye Insert 1"

Binnacle.com #: 32109

Fits internally in 1" diameter stanchion tubing with a wall thickness of 0.049".

$16.70

C.S. Johnson 29-501 Pulpit Anchor - 1" Rail

Binnacle.com #: 33270

Can be used on the stern rail and bow pulpit to terminate lifeline Jaw fittings.

$17.45

Grab Rail Post for 1" Rail

Binnacle.com #: 36112

Elevates a 1" diameter grab rail approximately 1" above the deck.

$23.20

Rail Fitting 90 Degree Elbow 1 in.

Binnacle.com #: 36265

$15.20

Sea Dog 293131 Four Way Corner Fitting for 1" Rail

Binnacle.com #: 38728

For use with 1" O.D. Stainless steel Tubing

$31.95

Stanchion or Gate Brace for 1 Inch Stanchion

Binnacle.com #: 39075

Used to brace the stanchion at lifeline gates.

$48.95

Rail Fitting Stanchion Cap for 1 in. Rail

Binnacle.com #: 39168

316 Stainless steel stanchion cap with a 5/16" pass-through hole. Secured with a 6mm diameter set screw.

$10.20