Propspeed KitView all products in Antifouling Bottom Paints

Propspeed Kits

With an ultra-slick topcoat, Propspeed® is specially formulated to prevent marine growth from bonding to metal surfaces below the waterline.

It is proven to increase boat efficiency, reduce drag and save fuel and maintenance costs.

It features an exceptionally strong chemical and mechanical bond between the metal substrate, the Etching Primer and the Clear Coat - ensuring that the Propspeed coating actually sticks to your running gear and performs season after season.

Propspeed also reduces the risk of corrosion by electrically isolating the metal, as well as limiting the exchanges between the ions and the gases contained in the water and the metal.

In short, if a reaction can’t occur, there will be no corrosion!

The Propspeed system is best used on propellers, shafts, struts, rudders, trim tabs, keel coolers, bow and stern thrusters, pod drives, sail drives and other underwater metal.

The Small Kit comes with everything needed for a DIY boat owner to apply the full Propspeed system to a saildrive or a small prop 12 to 24" in diameter. The Small Kit will coat a surface of 0.7m² (7.5ft²).

Small Kit includes:

• PropClean wipe
• PropPrep wipe
• 96 ml Etching Primer Base
• 24 ml Etching Primer Hardener
• 80 ml Clear Coat
• Stirring stick
• Application guide

• 1 x Propeller 66-96.5 cm (26-38") in diameter.
• 2 x Propeller's 36-76cm (13-30") in diameter.
• The Propspeed Medium Kit will coat a surface of 1.7m² (18.3ft²).

• PropClean wipe
• PropPrep wipe
• 240 ml Etching Primer Base
• 60 ml Etching Primer Hardener
• 200 ml Clear Coat
• Stirring stick
• Application guide