Isotherm Smart Energy Control Kit SED00033AA
The Isotherm Smart Energy Control (ISEC) offers a unique opportunity to dramatically reduce on board battery power consumption for refrigeration appliances. The revolutionary ISEC energy saving control system features a microprocessor-based module that minimizes battery consumption by adjusting refrigerator temperatures and compressor speeds.
The Isotherm Smart Energy Control kit (ISEC) not only makes your fridge intelligent but also allows the storage of a significant amount of cold energy in the loaded food and drinks. The Smart Energy Control reduces the cabinet temperature more than a conventional fridge without freezing the food. The temperature is continuously monitored via an air sensor in the cabinet. Cold energy is quickly generated by running the compressor at the highest rate of speed when a power surplus is available - such as when an engine is running or when connected to a shore power system. The cold that is stored in the food and beverages acts like a holding plate, keeping fridge temperatures lower for a longer period of time, causing the compressor to run less. When the ISEC microprocessor senses the fridge is running on battery alone, it runs the compressor at the slowest rate of speed to maintain proper temperatures. The combination of stored energy and variable compressor speeds results in a significant energy savings. It ensures compressor always runs at the most efficient Coefficient Of Performance (COP). It's simple, and easy to install, The ISEC retrofit kit fits on most Danfoss DC-only electronics used on most refrigerator brands.
With sophisticated, processor-based Smart Energy Control technology, significant power savings are achieved by continuously scanning key environmental factors to optimize compressor speed and maximize the performance/battery drain ratio. This can result in up to 35% savings due to a more efficient use of the compressor, and up to 50% savings with combined effects of stored cooling energy in food and drinks.
A simple-to-install kit, the ISEC kit consists of three parts: Control Module, Temperature Sensor, and Potentiometer. The kit can be easily retrofitted to most refrigerator or freezer units that use a Danfoss/Secop compressor (BD35 &50) with DC-only electronics. Watch the Video above.
Measures 4-1/2"H x 2"W x 1-1/2"D. Two-year warranty.
Isotherm Smart Energy Control Brochure