|
Allows the use of Class T fuses for fast acting circuit protection of inverters and other electronics
- Four stud design provides ample access around connecting stud to install large cable lugs without obstruction from the fuse I
- Insulating cover satisfies ABYC/USCG insulation requirements
- Cover breakouts allow wire access in any direction
- Stud design ensures secure fuse mounting even with high heat
- Stainless steel studs provide resistance to corrosion and high torque
- One-piece stainless flange nuts ensure safe and secure connections
- UL 94-V0 base resists high heat
- Ignition Protected
- Fuse not included
Specifications
Cable Size Up to 4/0 AWG Ignition Protected Yes Maximum Amperage 160A (BEST PRACTICE: Limit the amount of current in the circuit to 80% of the fuse rating.) Maximum Voltage 160V DC Fuse Mounting Blocks Tin-Plated Copper Maximum Torque 190 in-lb (21.47 Nm) 72 in-lb (8.13 Nm) Mounting Fastener Size 1/4" or M6 Hardware Terminal Stud Size 1/4"-20 (M6) Weight 1.10lb (0.5 kg)
Devices, which operate in a potentially explosive environment, must be ignition protected. This would include engine rooms with gasoline engines. There is a very specific set of tests which a device must pass to claim ignition protection. They include operating safely in an explosive mixture of propane and air. | 
