Marinetex 2 Oz. Kit White #:  27074
View all Marinetex Products in Gelcoat & Epoxy Kits
Marinetex 2 Oz. Kit White

Click to enlarge

Free Shipping This Item qualifies for Free Shipping on orders over $199! More Info...

Marine-Tex, the legendary high-strength repair compound designed for filling, bonding and rebuilding wood, fiberglass, ceramic, glass, metal, masonry and many plastics.
More Details...   #27074
Brand:  Marinetex
Add to Compare

View all Marinetex Products
View all Products in Gelcoat & Epoxy Kits

Marine-Tex, the legendary high-strength repair compound designed for filling, bonding and rebuilding wood, fiberglass, ceramic, glass, metal, masonry and many plastics. Marine-Tex is manufactured to the highest standards to meet the harsh demands of the marine and industrial environments, and solve many problems for home, auto and hobby applications.

Marine-Tex is a creamy paste consistency that can be applied on vertical or horizontal surfaces, easily fills gaps, and can be shaped to rebuild damaged components. Marine-Tex paste provides waterproof repairs that can be used with fiberglass tape or cloth to bridge holes and reinforce structural repairs as needed. Emergency and permanent repairs to machinery and equipment, hulls, decks, stripped fasteners, piping and tanks are all easily accomplished with the mighty repair kit. Marine-Tex can be sanded or ground to shape, tapped and drilled, and finished with most common paints and coatings.

Marine-Tex has set the standard for dependable repairs, just ask any of the thousands of satisfied, experienced users who know Marine-Tex works.

Technical Information:

Marine-Tex is a heavy-duty structural epoxy, used to repair aluminum, fiberglass and wooden boats, reinstall loose or stripped fasteners, permanently bond dissimilar metals without galvanic corrosion, and fill gouges in wood, metal and fiberglass, making repaired areas stronger than before.

Marine-Tex is an excellent choice for repairing problem areas located below the waterline. Marine-Tex is resistant to water and many chemicals.

COLORS: White and Gray. Marine-Tex Gray is recommended for machinery repairs. Marine-Tex White can be tinted with ITW Fibre-Glass Evercoat's coloring agents for fiberglass and wood applications. Be sure to use only a small amount of coloring agent (no more than 5% of the total volume of epoxy.)

PACKAGING: Marine-Tex White and Gray are available in convenient kits, 2 oz. and 14 oz.

COVERAGE: For 2 oz. kit, 17 square inches at 1/8" thick. For 14 oz. kit, 124 square inches at 1/8" thick. Maximum applied thickness is 1 1/2 inches.

MIXING RATIO: 5 parts epoxy resin to 1 part hardener - by volume. (When mixing by weight, the ratio is 6.3 parts resin to 1 part hardener.) Always keep the epoxy at room temperature before mixing.

CONSISTENCY OF MIXED EPOXY: Thick, creamy no-sag putty, easily applied.

POT LIFE (WORKING TIME): At 72F, 30 minutes if mixed and spread thin across mixing board. (A lump of material, or higher temperatures, may generate a 15 - 20 minute working time due to the heat the epoxy creates within itself.)

CURE TIME: 24 hours at a constant temperature of 72F. Lower temperatures will create longer cure times. It is not recommended to apply the product in temperatures below 55F


Mixing Information:

Before starting project, store Marine-Tex at 70°F for ease of mixing and application. Read instructions on labels or instruction sheets inserted in packaged kits. The temperature of the work area must be at least 55°F, and this minimum temperature must be maintained for 24 hours while the epoxy cures.

Work in a well-ventilated area. Avoid contact with skin and eyes. Wear rubber or vinyl gloves and eye protection. Wash hands immediately after use.

Surface preparation is the key to epoxy adhesion. Remove all contaminants (dirt, oil, grease) with acetone or lacquer thinner. Sand area, then remove grit to improve adhesion.

Marine-Tex is a high-strength structural epoxy, designed for convenient proportioning and mixing - by volume - in a ratio of 5 parts epoxy resin to 1 part catalyst/hardener. Example: 5 level spoonfuls of epoxy resin to 1 level spoonful of hardener. The nominal variation in proportioning the two components is 10 percent. Excess hardener / catalyst will not accelerate cure time, and it can reduce the strength of the cured epoxy. (If this epoxy is mixed by weight, the ratio is 6.3 grams of epoxy to 1 gram of hardener.)

Mix the properly proportioned components with a putty stick or hard plastic squeegee on a broad flat surface, wood, cardboard or plastic. Mix only enough for 15 or 20 minutes of nominal working time. After components are thoroughly mixed, spread your mixture into a long thin line to ensure a streak-free consistency and to provide you with maximum working time. Near the end of its working time, the mixture will become very warm, and it should be discarded


Average Customer Review: Based on Reviews. Write a review.
2 of 2 people found the following review helpful:
Very strong March 20, 2011
from Canada
I have a swing keel and the hole for the hinging bolt was seriously elongated so I removed the whole keel and filled the hole in with Marine-Tex and when it was dry I drilled the hole again and after one year it has done a great job supporting the weight of my 525 lb keel. Based on the specs it should be strong enough to hold much more than 525 lbs.

The only problem I had was that the putty would sag as it was hardening and I had to re-shape it a few times before it was hard enough to hold its own shape.
Was this review helpful to you? 2   0  
Displaying 1 to 1 (of 1 reviews) Page    1      
View All Customer Reviews

Free Ground shipping via Canada Post (UPS or Purolator for some locations) within Canada on most orders of $99 or more (pre-tax).
Q. What do we mean by most orders?
A. Some items are exempt from this offer and are indicated on the product page. Exempt items are usually bulky or heavy items such as buoys. Over 98% of the items on qualify for the free shipping offer.

To see what your shipping charge (if any) will be you can add the item(s) and quantities to the shopping cart and you will see a shipping cost calculator

Please Note:
Remote areas which require an "air stage" for delivery are exempt from Free Shipping offer. These are typically remote northern areas. Nunavut as well as many parts of the Yukon and NWT are exempt from free shipping

Money Back Guarantee
Guarantee You may return your purchase to us (with a return authorization number - use this form) within 30 days and we will refund the purchase price of the product. Items which are cut to order (rope, wire etc), software, chart cards and printed materials (paper charts, books) are not returnable.
Customers who bought Marinetex 2 Oz. Kit White also purchased
The Star Finder Book
The Star Finder Book


Not Rated

Browse for more products in the same category as the Marinetex 2 Oz. Kit White
Home » Marinetex
Tags Customers Associate with Marinetex 2 Oz. Kit White
Add Your Tags (how would you describe the Marinetex 2 Oz. Kit White in one or two words):
  Use spaces to separate tags. Use single quotes (') for phrases.
0 items

Compare Product  

Facebook Twitter YouTube Sign Up for Email