C. S. Johnson Splice Line Fitting - Gate Eye to Splice Eye Fitting LS-3300
Gate Eye to Splice Eye is used to help create a gate in Dyneema or Spectra lifelines. Threaded section typically passes through a stanchion, with 3/4 to 1 inch of adjustable thread gap. Used with LS-3100 Over Center Snap Gate Hook with Splice Eye.
Johnson Splice Line fittings allow you to splice hi-tech Dyneema® line to standard lifeline fittings. Johnson Splice Line Fittings are designed for 1/4" (6 mm) Dyneema® or Spectra® line - which are approved by World Sailing for use as lifelines in offshore racing (Min. rope diameter of 5 mm).
Splicing Eye for the line is machined from anodized 6061-T6 aluminum and the Gate Eye is T-316 stainless steel.
Dynema® and Spectra® are also great for cruising sailors as well.
Features: - C.S. Johnson LS-3300 Gate Eye to Splice Eye Fitting
- Lightweight, easy on the line
- Type: Gate Eye to Splice Eye
- Maximum Line Size: 5/16" (8 mm)
- Splicing Nut Body Diameter: 9/16" (14 mm)
- Thread Diameter: 5/16" RH
- Pin to Pin Length Minimum: 3-3/4" (95 mm)
- Pin to Pin Length Maximum: 3-15/16" (100 mm)
- Material: Hard anodized aluminum
NOTE: Professional splicing is recommended. Johnson Marine recommends changing out the line at 4 year intervals. |