ProMariner ProSafe FailSafe 60 Galvanic IsolatorView all products in Battery Accessories

Promariner ProSafe FailSafe galvanic isolator installs easily and does not require a dedicated monitor to verify the operational status of the galvanic isolator as required by non FailSafe Certified galvanic isolators.

Features:

• ProSafe FS 60 is built on robust FlatPack semiconductor platforms ensuring that in the event of a failure, the failure is safe by not compromising the ground continuity on-board when connected to AC Shore Power.
• ABYC A-28 July '08 Compliant and Fail Safe Certified: Certified by Underwriters Laboratories (UL). Insures shore power safety ground wire is maintained through the isolator.
• Flat Pack High Power Semiconductors: Robust high power diodes allow the FS Series to meet the new FailSafe criteria for conducting inrush currents of 5,000 amps for the required duration period.
• Robust high power diodes allow the FS Series to meet the new FailSafe criteria for conducting inrush currents of 3,000 amps for the required duration period.
• Ignition Protected: Meets ISO 8846 and can be mounted within an engine compartment.
• Meets ISO 8846 and can be mounted within an engine compartment.
• Gold Plated Terminations

Specifications:

ProSafe FS installs easily and does not require a dedicated monitor to verify the operational status of the galvanic isolator as required by non FailSafe Certified galvanic isolators.

• Shore cord inlet compatibility: Single 50 or dual 15, 16, 20 or 30
• Ratings VAC / Max AMPS / Hz: 120/240 VAC / 82A / 50 or 60 HZ
• Max temp.: 50° C
• Size L x W x H: 7.25" x 6.5" x 3.75"
• Weight: 3.7 lbs