Fender Covers, Hangers & Accessories

Davis MiniShockle Black

What's your load worth? 12" or 18" Long UV resistant hollow nylon webbing, sewn over a marine-grade elastomer and with 316 Stainless steel snap hooks rated with a 300-pound safe working load.

Deck Mat - Welcome Aboard 18" x 30"

Made from our UV resistant, stain resistant marine grade carpet material and back with a non-skid, non marking rubber that won't deteriorate over time.

Fender Hook Snaps Stainless Steel - Pair

316 SS. 1-1/8" X 1-3/8" X 1"

NHS 409 Pipe Rail Life Line Hang Up

Multi-purpose Hang-Up for rails. Fits lifelines, small railings, and rails up to 1" in diameter.

Rule High Speed Inflator/Deflator

The Rule High Speed Inflator/Deflator inflates a typical 4-man dinghy or a 120" X 72" X 22" family inflatable pool under 2 minutes. Adjustable nozzles have been included for most inflatables and valve types.

Taylor Made Pontoon Rail Fender Adjuster 4 Pack - 1139

Designed specifically for the 1" & 1-1/4" square tube rails of pontoon boats.

Fendress 1-Ply Fender Covers - Pair

Four sizes of French-made fender covers offer the highest level of quality, strength and durability to protect all boats. Single-ply and sold as pairs.

Fendress Deluxe 2-Ply Fender Cover - Each

For HTM3 fenders - 10 x 26 in. or HTM4 fenders - 13 x 34in Made of 2-ply material. Single cover

Fendress Deluxe 2-Ply HTM4 Fender Cover 13" x 34" - Wine (Clearance)

F7/HTM4 Fender Cover for 13 x 34 fenders. Made of a 2-ply material. Sold as singles

Taylor Made Traditional Fender Boots

Black or blue knit fabric hugs the fender for a close fit. Smooth polyester fabric resists picking up dirt and grit.

Mooring Snubber

Three sizes of snubbers to protect against the forces of wind, waves and wake. The Snubber is manufactured from highly elastic rubber to absorb shock loads on the dock lines.

Taylor Big B Fender Hanger

Deck Mat - Boat Shoes Only 18" x 24"

Plush carpet that is waterproof, stain and fade resistant, mold and mildew resistant.

Dockedge Fender Line - 5 Ft. (pair)

They may be used for twin eye or center hole fender applications

Dockedge Fender Line - 8 Ft. (pair)

They may be used for twin eye or center hole fender applications

Taylor Quick Draw Fender Adjuster

Tightly holds to Bow Rails, Grabs Rails, Lifelines, Cleats, and more! Fits 1/4" - 1/2" fender lines

NHS FA1 Automatic Fender Adjuster

N.H.S. - The original nautical hanging systems. The FA1 accommodates wooden rails and eliminates tying and untying fender lines.

Davis 393 Fender Tender II

Seadog 327200 Fendermate 2 Pack

Clamps securely onto both 7/8" and 1" round tubing and 3/16" and 1/4" life line wire

Rail Fender Hanger FH01

Taylor Stainless 2 Fender Rack 9 to 11 in. Diameter

Stainless steel storage rack for two of any style fender between 9 and 11 inches in diameter.

Taylor Stainless 3 Fender Rack 9 to 11 in. Diameter

Stainless steel 3 fender rack for fenders 9 to 11 inches in diameter.

Taylor Stainless 2 Fender Rack 7 to 9 in. Diameter

Our best seller. High gloss stainless fender rack for 7 to 9 inch diameter fenders, including the popular 8 x 20 inch HTM.

Taylor Stainless 3 Fender Rack 7 to 9 in. Diameter

Completely pre-assembled and tightens to accommodate any angle of rail. High gloss 316 stainless steel. Fits three of any type of fender 7 to 9 inches in diameter.

Taylor Oversized J Hook For Fender Racks

Adapts Taylor Fender Holders to Mount on Railings Larger than 7/8"

Clamcleat CL234W Fender Cleat - Large Loop Cleat White

Fender Cleat stays on the fender line, so nothing gets lost. There are no moving parts, and it fits all sizes of rail tubing.

Davis 397 Secure Chafe Guards Pair Black

Fits braided or twisted line from 3/8 to 1" (10-25 mm). Outside cover: tough, UV-stabilized nylon webbing. Each chafe guard is 16" long (40 cm)

Sidewind Fender Covers - Pair

Heavy Duty Polyester material, elasticized at the top and bottom. UV Resistant. Compatible with HTM (Hole Through the Middle) and "R" series Dual eye boat fenders. Choose between 8 inch diameter or 10 inch diameter.