Clamcleat Rope Cleats

Clamcleat CL2245 Fairlead for CL205, CL220

Clamcleat CL244 Aluminum Boom Cleat and Clamps

Clamps onto tubes & windsurf booms.

Clamcleat CL262 Power Grip 2

Take the pain out of pulling smaller ropes. Two handed grip.

Clamcleat CL201 Vertical Nylon

For rope diameters between 6 mm and 12 mm. The overall length is 95 mm and uses 1/4" fasteners.

Clamcleat CL202 Horizontal Nylon

Double-entry can hold two lines, each between 6 mm and 10 mm in diameter.

Clamcleat CL203 Junior Nylon

One of the most popular Clamcleats. Features an integral fairlead that holds rope between 3 mm and 6 mm in diameter in place.

Clamcleat CL204 Mini Nylon

The name fits. The Mini is for a line from 1/8" to 1/4" in diameter.

Clamcleat CL205 Major Nylon

4-13/16" in length and capable of holding rope diameters between 3/8" and 5/8".

Clamcleat CL206 Lateral Starboard Nylon

This cleat has many uses for control lines on dinghies and sailboats and non-marine uses, including securing safety lines on ladders and exercise equipment.

Clamcleat CL207 Lateral Port Nylon

Clamcleat CL208 Bollard Cleat Nylon

The bollard allows 6 mm to 10 mm diameter rope to be wrapped around as well as using the cleat.

Clamcleat CL209 Midi Nylon - Black

Clamcleat CL211Mk1 Racing Junior Silver

A very strong alloy cleat that can be fitted to all curved and flat surfaces.

Clamcleat CL211 MK1AN Racing Junior Mk1 Hard Anodized Aluminium

A hard-anodized finish gives a hard-wearing surface. The cleat can be fitted to all curved and flat surfaces.

Clamcleat CL211 Mk2AN Racing Junior Hard Anodized

A hard-anodized finish gives a hard-wearing surface and the closed design allows a rope to be pulled from all angles to enable cleating. Now used by some manufacturers with their 50 mm Opti Racing Masts.

Clamcleat CL211 Mk2AN/S2 Racing Junior Mk2 with Becket Hard Anodized

Hard anodized finish to give a hard-wearing surface. Used for the Optimist halyard on a 50 mm racing mast. The becket enables halyard purchase, and the closed design allows a line to be pulled from all angles.

Clamcleat CL215 Side-Fixing Midi Nylon

The side mounting holes give the CL215 a short length, ideal on a narrow surface. Holds 4 mm to 8 mm rope diameters.

Clamcleat CL217 Mk1 Side Entry Starboard

Choose either the cost-effective, high-quality silver stove enamel finish or the hard-wearing hard-anodized finish.

Clamcleat CL218 Mk1 Side Entry Port

Choose either the cost-effective, high-quality silver stove enamel finish or the hard-wearing hard-anodized finish.

Clamcleat CL217 Mk2 Side Entry Starboard

Choose either the cost-effective, high-quality silver stove enamel finish or the hard-wearing hard-anodized finish.

Clamcleat CL218 Mk2 Side Entry Port

Clamcleat CL219 Racing Vertical

For a line between 1/4" and 1/2" in diameter.

Clamcleat CL220 Racing Major

A large Clamcleat for rope diameters from 1/2" to 5/8". Lightweight and durable performance with a silver stove enamel coating for a cost-effective, high-quality finish.

Clamcleat CL222 Racing Mini

Small, neat and lightweight for 3-6 mm (1/8"-1/4") rope. Advanced tooth technology to hold all types of small diameter rope. Can be fixed with standard screws and rivets, on tubular or flat surfaces.

Clamcleat CL223 Loop Cleat Black

The Loop cleat is a nylon cleat for tensioning 3 mm to 6 mm diameter lines. Rigged onto a rope, the CL223 is quick to tension, easy to adjust and release.

Clamcleat CL231 Midi with Integral Fairlead

The fairlead guides 4 mm - 6 mm diameter rope into the teeth from up to 90 degrees - same hole centres as the Midi CL209 and CL254.

Clamcleat CL232 Cub Cleat

Designed for situations where the rope has to be controlled from a position remote from the cleat.

Clamcleat CL234W Fender Cleat - Large Loop Cleat White

Fender Cleat stays on the fender line, so nothing gets lost. There are no moving parts, and it fits all sizes of rail tubing.

Clamcleat CL253AN Trapeze & Vang Cleat Hard Anodized

Hard anodized, the Trapeze Cleat found on most world-class dinghies.

Clamcleat CL254 Racing Midi

Clamcleat CL254AN Racing Midi Hard Anodized

Hard anodized flat grey finish giving the ultimate hard-wearing surface. Very popular on competitive racing dinghies like the C420.

Clamcleat CL257 Auto-Release Racing Mini

Provides the solution to locking-down a rudder blade yet allowing it to flip-up if it hits the bottom. The CL257 can be fitted to virtually all tillers.

Clamcleat CL263 Nylon Micros Cleat

A very small, neat and lightweight nylon cleat for securing 1 mm to 4 mm diameter line.

Clamcleat CL803 Tapered Pad for CL209 CL254 & CL254AN

Fits under CL209, CL254 and CL254AN cleats to allow angled rope/cleating alignment. Can be mounted in either direction.

Clamcleat CL817 Cage For CL815 - Black

Clamcleat CL826-11AN Aero Cleat with CL211 Mk2 Hard Anodized

Compact hard-anodized aluminum 2:1 cleat rigged on 4 to 6 mm diameter rope.