Cam Cleats

Servo 11 Under Bracket Cleat 3-7 mm Line

The Servo Cleat is the first cleat whose jaws only open when the sheet is pressed vertically. The Jaws allow vertical pressure from the sheet to be transformed into rotational movement of the jaws.

Harken 150 Standard Cam-Matic Cleat Anodized Aluminum

Max line diameter 1/2" (12mm). Max working load 300lb (136kg). Pawl material - aluminium.

Harken 468 Micro Cam-Matic Cleat Aluminum

Aluminum pawls with a maximum working load of 200 lb. The maximum line diameter is 1/4".

Harken 471 Micro Carbo-Cam Cleat

Maximum working load of 150 lb. and a maximum line size of 6mm. Lightweight fibre-reinforced for racing where weight is critical, or where adjustments are less frequent.

Harken 150SP Cam-Cleat for Windward Sheeting Car

Modified 150 Cam-Matic cleat with two stainless steel posts for use with Windward Sheeting car.

Harken 280 Offshore Cam-Matic Cleat

The 280 Offshore Cam-Matic Cleat is for lines up to 5/8" in diameter. It has a maximum working load of 500 lbs, anodized aluminum pawls.

Harken 150 Cam Cleat Rebuild Kit

Rebuild Kit for Cam-Matic® Cam Cleat and includes cam replacement springs, ball bearings, base plate, top caps, and instructions.

Harken 496 Fast Release Fairlead with Cam-Matic Cleat

Fast Release fairleads feature low-friction, angled stainless steel line guides on the exit side of the cleat.

Harken 238 Cam-Matic Cleat On Plate & Bullseye

150 Cam-Matic® with bullseye keeps line fair. Mounts on stainless steel base.

Harken 239 Carbo-Cam Cleat On Plate & Bullseye

365 Carbo-Cam® with bullseye keeps line fair. Mounts on stainless steel base.

Harken 395 29mm Pivoting Lead Block with 468 Cam-Matic Cleat

A pivoting lead block with a Micro 468 Cam-Matic cleat is used for halyard controls on larger keelboats and as "head knockers" on dinghies for sheeting directly from the boom.

Harken 494 Standard Fast Release Fairlead

Use for fast spinnaker take-downs during mark roundings—anywhere fast release is crucial.

Harken 396 29mm Pivoting Lead Block with 471 Carbo-Cam Cleat

The lighter Safe Working load of the two 29mm Pivoting lead blocks. It has a 471 Carbo Cam-Matic cleat with a 150-pound Safe Working load.

Harken 495 Micro Fast Release Fairlead

Angled lead keeps the line away from the Cam to eliminate unexpected re-cleats during maneuvers. Use for fast spinnaker take-downs during mark roundings or anywhere fast release is crucial.

Harken Angled 15 Degree Cam-Matic Riser

Harken 294 Angled 15 Degree Micro Cam-Matic Riser

Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting.

Harken 438 Cam Cleat Mast Adapter Plate

Perfect for use on masts and booms. It raises the cleat off the mast to improve the cleating angle and control.

Harken Flat Cam-Matic Riser

Harken Standard Cam-Matic Wedge Kit

Fits 150 and 365. Fastener spacing1 1/2" (38mm).

Harken Micro Cam-Matic Wedge Kit

Fits 423. Fastener spacing 1 1/16 (27mm)

Harken Offshore Cam-Matic Wedge Kit

Fits Harken Offshore Cam-Matic 280 cam cleat and may improve the angle of your cams.

Harken 2156 40mm Pivoting Lead Block with 150 Cam Cleat

A pivoting lead block with the stronger 150 Cam-Matic cleat is used for halyard controls on larger keelboats and as "head knockers" on dinghies for sheeting directly from the boom.

Harken 298 Wire Fairlead for 150/365 Cam Cleat

Harken 205 Little Swivel Base with Cam-Matic

The low profile 205 is used when installation is at deck level and when smaller blocks are used.

Harken 144 Mainsheet Swivel Base

The 144 is the standard configuration with a tall arm. It is ideal for mounting in the cockpit or for use on larger keelboats and small offshore boats that use 3.00 in (76 mm) plastic blocks.

Harken Bullseye with Swivel Base & 200 Cam-Matic

Ronstan 58 Swivel Dead Eye with Medium C-Cleat

Swivelling dead eye and cleat unit. Features Aluminum arm, 360 rotation, medium T-Cleat & fairlead. Suits 1/8" - 1/2" rope.

Ronstan C-Cleat Cam Cleat Large

For rope 1/4" (6mm) to 5/8" (16mm) in diameter. Easy cleating and releasing of control lines in every application and load condition. Strong, light and corrosion-free. Various colors.

Ronstan RF5416 Medium C-Cleat Riser Curved Surface Adapter

Riser, curved surface adapter that suits Ronstan Medium C-Cleat and T-Cleats.

Ronstan C-Cleat Cam Cleats Medium

For rope diameters between 1/8" (3mm) and 1/2" (12mm). Easy cleating and releasing of control lines in every application and load condition. Strong, light and corrosion-free. Various colours.

Ronstan RF5000 C-Cleat Small Carbon Fibre Cam Cleat 3/32" - 5/16"

Easy cleating and releasing of control lines in every application and load condition. Strong, light and corrosion free. Various colors.

Ronstan RF67 Swivel Dead Eye with Small C-Cleat

Swivelling dead eye and cleat unit. Features Aluminum arm, 360 rotation, small C-Cleat & fairlead. Suits 3/32" - 5/16" rope.

Ronstan Fairlead for Medium C-Cleat

Ronstan Fairlead for Small C-Cleat

Clearance Item - Limited quantities

Ronstan Medium C-Cleat Rope Guide Fairlead

Harken 375 Standard X-Treme Angle Fairlead for 150/365 Cam Cleats

Used with Standard size Cam-Matic Cleats and allows releasing and recleating at angles up to 90° to the cleat.