Battery Accessories

Ancor Lead Battery Terminal Combo Pack

A set of lead terminals with 5/16" and 3/8" studs and Yellow Brass wing nuts.

Ancor Tinned Brass Battery Terminal Combo Pack

Tin plated brass terminals are up to 40% more conductive than lead terminals.

Battery Equaliser 500 ml

Battery Equaliser is a non-corrosive, non-flammable, water-based liquid battery treatment, formulated to extend the life and performance of any new or used lead acid battery. Simply top up cells with recommended amount for up to 3 times the life of batteries.

Battery Hold Down Strap 54"

Battery hold down strap keeps a heavy battery secure.

Blue Sea 1830 M2 DC SoC Monitor

Accurately measure and monitor the State-of-Charge of your batteries. Supports programmable shunt ratios.

Blue Sea 1850 Vessel Monitor System

Performs comprehensive monitoring of four critical systems in one compact organic LED digital monitor

Blue Sea 2003 Power Post 3/8 Stud

Stud is 3/8" in diameter by 7/8" high.

Blue Sea 2016 Dual Power Post 2 x 5/16 Stud

Provides a termination point for extending the length of outboard harnesses or other conductors.

Blue Sea 2018 Dual Power Post 5/16"-18 and 3/8"-16 Studs

Provides a termination point for extending the length of outboard harnesses or other conductors.

Blue Sea 7610 SI ACR Automatic Charge Relay with Start Isolation 12/24V DC 120A

Automatic Charging Relay with Start Isolation, combines batteries during charging but isolates batteries when discharging and starting the engines.

Blue Sea 7611 BatteryLink Automatic Charging Relay - 12V/24V DC 120A

Blue Sea 7622 ML-ACR Automatic Charging Relay with Manual Control 12V DC 500A

500 Amp Charging Relay automatically combines batteries during charging, and isolates batteries when discharging and when starting the engine, which prevents line drop.

Blue Sea 9012 L-Series Solenoid 12/24V DC 250a

Activated using a low amperage ON-OFF switch.

Blue Sea 9160 ML-Series Link Bus

Paralleling device for the ML Series of Remote Battery Switches, and the ML Series Automatic Charging Relays.

Moeller 042215 Battery Tray 24 Series Batteries

Holds Group 24 series batteries. Non-corrosive hi-strength plastic construction.

Moeller 042216 Battery Tray 27-31 Series Batteries

Non-corrosive high-strength polyethylene construction resists chemicals and rust. Holds 27 to 31 Series batteries.

Promariner Battery Status Monitor Remote

Can be conveniently located to monitor the charge status of up to three 12V batteries without accessing the charger.

ProMariner ProSafe Fail-Safe FS30 Galvanic Isolator

Promariner ProSafe FailSafe galvanic isolator installs easily and does not require a dedicated monitor to verify the operational status of the galvanic isolator.

ProMariner ProSafe FailSafe 60 Galvanic Isolator

Promariner ProSafe FailSafe galvanic isolator installs easily and does not require a dedicated monitor to verify the operational status of the galvanic isolator

Promariner Remote Control For Pronautic P Battery Charger 63100

Designed for use with Promariner ProNautic P Series Battery Chargers

Sea Dog 415082 Heavy Duty Battery Box Strap 48"

A step up, a 48" long woven polypropylene Battery Box Strap with stainless buckle, two chrome-plated brass mounting brackets, and four #8 FH fasteners.

Sea Dog 415094 Battery Box Strap & Brackets 54"

54" long woven polypropylene Battery Box Strap with injection moulded nylon buckle and two mounting brackets.

Sea Dog 425020 Wave LED Battery Test Switch 2 Battery

An economical gauge to quickly test the current charge on two separate batteries.

Victron Argo FET Battery Isolator 200 Amps

FET isolators allow simultaneous charging of two or more batteries from one alternator (or a single output battery charger), without connecting the batteries together.

Victron Battery Temperature Sensor for BMV-702 & BMV-712 Smart

Optional Battery Temperature Sensor for Victron BMV-702 & BMV-712 Smart Battery Monitors.

Victron BMV-700 Battery Monitor

A high precision battery monitor to calculate ampere-hours consumed and the state of charge of a battery.

Victron BMV-702 Battery Monitor

Victron's newest high precision battery monitor. Battery "fuel gauge", "time-to-go" indicator and much more.

Victron BMV-712 Smart Battery Monitor with BlueTooth

A high precision battery monitor with Bluetooth built-in and ready for the Internet of Things era. With Bluetooth available in most Victron Energy products, wireless communication between products simplifies system installation and enhances performance. The VictronConnect app takes advantage of the IoT era now, and you can get live status information and configure the BMV-712 Smart with the app.

Victron Smart Battery Protect 100A

The Smart BatteryProtect disconnects the battery from non-essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.

Victron Smart Battery Protect 220A 12/24V

The Smart BatteryProtect disconnects the battery from non-essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.

Victron Smart Battery Protect 65A 12/24V

The Smart BatteryProtect disconnects the battery from non-essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.

Victron VE.Direct Bluetooth Smart Dongle for iPhone and Android

Use of the VE.Direct Bluetooth Smart dongle allows display your BMV-70X Battery Monitor or MPPT information on iOS and Android devices.

Victron VE.Direct Network Cable

Marine Network Cable; Used To Connect BMV-70 Series And Low Power MPPT Battery Charger To Color Control GX; VE Direct To USB Connection; Black

Victron VE.Direct to USB Interface 1.8M

Marine Network Cable; Used To Connect BMV Series Battery Monitor To Computer; VE Direct To USB Interface; 1.8 Meter Length; Black

Xantrex 854-2021-01 Connection Kit 50 with Fuse

Connection Kit for LinkLITE and LinkPRO Battery Monitors.