Antenna and GPS Mounts

Antenna Mount ABS Ratchet

Antenna Mount For Rail Mounting - Stainless Steel

Fits standard 7/8" and 1" round rails. SS316. Low Profile. No ratchet

Antenna Rail Mount 7/8" and 1" Rail

Rail mount bracket for 7/8", and 1" diameter round rails. Fits industry standard 1"-14 thread antenna bases.

Antenna Ratchet Mount Stainless Steel

Glomex RA129/30 GPS Antenna Extension Mast 12"

12" Aluminum extension mast to raise an external GPS antenna.

Glomex RA134 Nylon Rail Swivel Mount

Reinforced nylon 1"-14 thread Antenna Mount for horizontal or vertical 7/8" and 1" diameter rail. Knob locking.

Glomex RA135 4-Way Nylon Ratchet Antenna Mount

Reinforced UV resistant nylon four way ratchet antenna mount with a knob for easy and fast instalaltion on deck or bulkhead.

Glomex RA135FME Nylon Ratchet Mount for Glomeasy Antennas

4-way nylon ratchet mount with knobs and cable feed for Glomeasy antennas – 5/8″-24 thread

Glomex RA145 Nylon Pulpit Railmount for GPS Antenna

For installation of GPS antennas on horizontal rails of 7/8" and 1" diameter.

Glomex RA350/6FME Coax Cable 6m for Glomeasy VHF and AIS Antennas

This is a 6m (20') long RG-8X low-loss coaxial cable for use with Glomeasy RA300 VHF and the RA300AIS AIS antennas.

Glomex RA351 FME Female to SO-239 Adaptor for Glomeasy Antenna

FME Female to SO-239 Adaptor allows for Glomeasy antennas to use coax cable with an existing PL259 VHF connector.

Glomex V9172 TV Antenna Mount

Micro-fused, electro-polished and hand-polished stainless steel angled slip mount for Nashira TV antennas.

Nylon Antenna Base - Fixed - GPS Only

Nylon GPS antenna mount. Fixed. GPS only. 1 inch thread dia.

Ram Hand Held Quick Release Mount RAM-120U

The RAM-120U consists of a double socket arm, 2.5" diameter round base with the universal AMPS hole pattern and side clamping cradle that is designed to hold a large variety of electronic devices.

Ram Mount Handheld Mount with U-Bolt Rail Clamp RAM-120-231U

Designed for handheld items, such as a VHF or GPS.

RAM Mount Single Swing Arm Mount Vertical RAM-109VU

RAM Mount single swing arm mount consists of a 6" long bent swing arm mounted on a vertical surface mounting base.

RAM Universal Marine Electronic Mount RAM-111

Powder coated marine grade aluminum mount, consists of a double socket arm mount, one round 2-1/2" diameter base with 1-1/2" rubber ball and flat 6-1/4" x 2" rectangular plate.

Scanstrut ROKK Mini Adjustable Body RLS-AM

Multi position adjustable body that mounts to a choice of bases and top plates to mount fishfinders and small chartplotters. Top plate and mounting base sold separately.

Scanstrut ROKK Mini Rail Mount RLS-402

Fits straight or curved rails from 3/4" (19 mm) to 1-1/4" (34 mm) in diameter. Three UV resistant black rubber inserts are included to ensure optimum fit.

Scanstrut ROKK Mini Tablet Clamp RL-508

Fits devices from 5" to 8 1/2" in width, including iPad, iPad Pro, iPad Air, iPad Mini, Google Nexus and Samsung Galaxy Note.

ScanStrut ROKK Self Drill Universal Top Plate

Self drill Universal top plate to fit a wide range of displays.

Scanstrut ROKK Tablet Mount with Rail Mount 508-402

Rail mounts all tablets with a 7" to 12.9" screen size; Mini to Pro sizes. The hi-performance ROKK Tablet Mount Kit is part of the ROKK Modular Mounting System that enables secure attachment of electronics to boats, cars, off-road vehicles, aircraft and more.

Scanstrut SPR-7-AM Scanpod Arm Mounted Pod for 7" Display

Stanchion mount pod for fishfinders and displays up to 7 inches. Solves the challenge of finding a mounting surface to install displays on your powerboat, RIB or sailboat. Fits rails 1" to 1.3" in diameter.

Scotty 163 Ball Mount for Fish Finders Up to 9 Inches

Heavy-duty 1-1/2" ball mount with 8" x 3" top plate allows you to position 7" to 9" fish finders at the perfect angle on your boat.

Scotty 173 Ball Mount for Large Fish Finders

Heavy-duty 2-1/4" ball mount with 11-1/2" x 3" top plate allows you to position your 10" - 12" fish finder at the perfect angle on your boat.

Sea Dog 329300 Adjustable Antenna Base

This Adjustable Antenna Base features dual swiveling mounts for full adjustability and a ratchet-style handle for side or deck mounting.

Sea Dog 329515 Fixed Antenna Base 304 Stainless Steel

Fixed mount antenna bracket with 1"-14 thread. Formed 304 stainless steel construction and 4-1/4" high. Designed to allow wire to feed directly through the base.

Shakespeare 4187 Stainless Steel 4 Way Ratchet Antenna Mount

Versatile free standing antenna mount with a four-way ratchet design. It can be used for mounting to vertical or horizontal surfaces - deck or bulkhead and adjusts to a slanted surface.

Shakespeare 4188-S Ratchet Rail Mount

Handles antennas up to 8' in length with a four-way ratchet design for easy installation on vertical, horizontal, or slanted rails.

Shakespeare 4720 Antenna Rail Mount

Versatile rail mount bracket for 7/8", 1" and 1-1/4" diameter round, square, vertical or horizontal rails. Fits industry standard 1"-14 thread antenna bases.

Snapit M006 4" Diameter Mounting Pad 1"

A practical general-purpose mounting pad. Snapit! to your 1" diameter pedestal guard.

Snapit! M0015PM Pedestal Guard Rectangular Mounting Pad 1"

A unique general purpose mounting pad that utilizes the wasted space at the top of your pedestal guard

Snapit! V006L Rectangular Mounting Pad

An economical 3" x 6" mounting pad perfect for mounting a small GPS or fishfinder. Fits tubing from 3/4" to 1-3/8" in diameter.