Nova Kool LT201-FM Ice Box Conversion Kit - Medium PlateView all products in Freezers Refrigerators & Ice Box Kits

The Nova Kool LT201 FM Medium plate model is supplied with an efficient Danfoss BD35 Condensing unit with a compressor and a large 32" (813 mm) x 11-1/2" (292 mm) cold plate and is intended for use in larger refrigerators or freezers.

The LT201-FM model comes with a single 336 sq. inch cold plate that can be bent to fit the application.

Suits cold box applications up to 12 cf (360 l) or freezer applications up to 6 cf (180 l) for an icebox with 15 cm of foam insulation. A spillover over design is 4 cf freezer and 8 cf refrigerator. 

The LT201-FM is ideal for a "spillover" design; where the cold box is divided, and one part of the box becomes a part freezer, and the other section a cooler.

The FM Medium plate model is also ideal if you want all freezer or all refrigerator.

If your icebox is mostly refrigerator, but you would like a small freezer, the Nova Kool RT4 or RT6 evaporators may fit your box the best and are recommended.

The above is a guide only and is based on the cooler or freezer being used as a holding unit only. (what you put in must be cold for a cooler and frozen for a freezer) 

 

The sizes are based on a well built, top opening box with;

• 4" of foam insulation.
• Ambient temperature 90°F (32°C).
• Target Refrigerator temperature at 39°F (4°C)
• Target Freezer temperature at 15°F (-10°C).

Features:

• Self-sealing couplings. (unit is precharged with refrigerant)
• Evaporator supplied with 12' line set.
• Efficient air-cooled condenser will provide years of simple reliable service in the tropics.
• Condenser is sized specifically to ensure capacity in the hottest of climates
• Variable speed compressor. (adjusted by changing the resistance in control circuit)
• 18 GA powder-coated steel with a compact footprint.
• Backed with Nova*Kool's Easy 2 Year Warranty Program on all components.
• Environmentally sound R134a refrigerant.
• Simple, efficient and reliable roll bond plate evaporators. Can in many cases be bent to conform to your requirements. There are three evaporator plates in total, divided in two sections. Sections are 16" x 11 3/8" and can be spaced a maximum of 18" apart.
• Compressor designed to run continuously on a 30-degree heal.
• Low amperage fan.
• Compressor Draw: 12 VDC - 4.2A / 24 VDC - 2.1A
• Voltage: 12 & 24V DC standard.